Directive 2014/68/EU代替Directive 97/23/EC
2014/68 / EU指令下压力设备协调标准的标题和参考文献列表
hgcert update the standard (and reference document)以下认证，华盖认证提供培训和认证服务：
EN 3-8:2006 Portable fire extinguishers - Part 8: Additional requirements to
EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar
EN 3-8:2006/AC:2007
EN 19:2016 Industrial valves - Marking of metallic valve
EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels
EN 334:2005+A1:2009 Gas pressure regulators for inlet pressures up to 100 bar
EN 378-2:2016 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
EN 593:2009+A1:2011 Industrial valves - Metallic butterfly valves
EN 676:2003+A2:2008 Automatic forced draught burners for gaseous fuels
EN 676:2003+A2:2008/AC:2008
EN 764-4:2014 Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
EN 764-5:2014 Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification
EN 764-7:2002 Pressure equipment - Part 7: Safety systems for unfired pressure equipment
EN 764-7:2002/AC:2006
EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
EN 1092-1:2007+A1:2013 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
法兰和接缝-管道,阀,装置和附件圆形法兰,指定PN-第1部分:钢法
EN 1092-3:2003 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges
EN 1092-3:2003/AC:2007
EN 1092-4:2002 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges
EN 1171:2015 Industrial valves - Cast iron gate valves工业阀门 铸铁闸阀]
EN 1252-2:2001 Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures betwe
EN -80°C and -20°C
EN 1349:2009 Industrial process control valves工业处理控制阀门
EN 1515-4:2009 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
EN 1562:2012 Founding - Malleable cast irons
EN 1563:2011 Founding - Spheroidal graphite cast irons
EN 1564:2011 Founding - Ausferritic spheroidal graphite cast irons
EN 1591-1:2013 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
EN 1626:2008 Cryogenic vessels - Valves for cryogenic service
EN 1653:1997 Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units
EN 1653:1997/A1:2000
EN 1759-3:2003 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges
EN 1759-3:2003/AC:2004
EN 1759-4:2003 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges
EN 1797:2001 Cryogenic vessels - Gas/material compatibility
EN 1866-2:2014 Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of
EN 1866-1
EN 1866-3:2013 Mobile fire extinguishers - Part 3: Requirements for the assembly, construction and pressure resistance of CO2 extinguishers which comply with the requirements of
EN 1866-1
EN 1983:2013 Industrial valves - Steel ball valves
EN 1984:2010 Industrial valves - Steel gate valves
EN ISO 4126-1:2013 Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2013)
EN ISO 4126-3:2006 Safety devices for protection against excessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006)
EN ISO 4126-4:2013 Safety devices for protection against excessive pressure - Part 4: Pilot-operated safety valves (ISO 4126-4:2013)
EN ISO 4126-5:2013 Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO 4126-5:2013)
EN ISO 4126-7:2013 Safety devices for protection against excessive pressure - Part 7: Common data (ISO 4126-7:2013)
EN ISO 9606-1:2017 (new) Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)焊工资格测试 熔焊 第1部分：钢
EN ISO 9606-2:2004 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)焊工资格测试 熔焊 第2部分：铝及铝合金
EN ISO 9606-3:1999 Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)焊工资格测试 熔焊 第2部分：铜及铜合金
EN ISO 9606-4:1999 Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)
EN ISO 9606-5:2000 Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000)
EN ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)无损检测人员认可
EN 10028-1:2017 (new) Flat products made of steels for pressure purposes - Part 1: General requirements
EN 10028-2:2017 (new) Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
EN 10028-3:2017 (new) Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
EN 10028-4:2017 (new) Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
EN 10028-5:2017 (new) Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
EN 10028-6:2017 (new) Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
EN 10028-7:2016 Flat products made of steels for pressure purposes - Part 7: Stainless steels
EN 10204:2004 Metallic products - Types of inspection documents金属产品.检验文件类型
EN 10213:2007+A1:2016 Steel castings for pressure purposes承压设备用铸钢
EN 10216-1:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties无缝钢管-技术交货条件-第1部分:指定室温非合金钢管
EN 10216-2:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10216-3:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
EN 10216-4:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
EN 10216-5:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
EN 10217-1:2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties承压用焊接钢管
EN 10217-1:2002/A1:2005
EN 10217-2:2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-2:2002/A1:2005
EN 10217-3:2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
EN 10217-3:2002/A1:2005
EN 10217-4:2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
EN 10217-4:2002/A1:2005
EN 10217-5:2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-5:2002/A1:2005
EN 10217-6:2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
EN 10217-6:2002/A1:2005
EN 10217-7:2014 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes承压用焊接钢管-技术要求-不锈钢管
EN 10222-1:2017 Steel forgings for pressure purposes - Part 1: General requirements for op
EN die forgings承压用锻件
EN 10222-2:2017 Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
EN 10222-3:2017 Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
EN 10222-4:2017 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
EN 10222-5:2017 Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
EN 10253-2:2007 Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
EN 10253-4:2008 Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
EN 10253-4:2008/AC:2009
EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
EN 10272:2016 Stainless steel bars for pressure purposes
EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
EN 10305-4:2016 Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
EN 10305-6:2016 Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
EN ISO 10931:2005 Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005)
EN ISO 10931:2005/A1:2015
EN 12178:2016 Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, testing and marking
EN 12263:1998 Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests
EN 12266-1:2012 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements工业阀门-金属阀门测试-第1部分 压力测试，测试程序，接受准则-强制性要求
EN 12284:2003 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking冷却系统和加热泵.阀.要求、试验及标记
EN 12288:2010 Industrial valves - Copper alloy gate valves工业阀门-铜合金闸阀
EN 12392:2016 Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment铝和铝合金.锻造和铸造产品.用于生产压力设备的产品的特殊要求
EN 12420:2014 Copper and copper alloys - Forgings
EN 12434:2000 Cryogenic vessels - Cryogenic flexible hoses
EN 12434:2000/AC:2001
EN 12451:2012 Copper and copper alloys - Seamless, round tubes for heat exchangers
EN 12452:2012 Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers
EN 12516-1:2014 Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells工业阀门 壳体强度 第1部分：钢质阀壳列表法
EN 12516-2:2014 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells工业阀门 壳体强度 第2部分：钢质阀壳计算法
EN 12516-3:2002 Valves - Shell design strength - Part 3: Experimental method
EN 12516-3:2002/AC:2003
EN 12516-4:2014 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
EN 12542:2010 LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture
EN 12735-1:2016 Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems
EN 12735-2:2016 Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment
EN 12778:2002 Cookware - Pressure cookers for domestic use
EN 12778:2002/AC:2003
EN 12778:2002/A1:2005
EN 12952-1:2015 Water-tube boilers and auxiliary installations - Part 1: General
EN 12952-2:2011 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
EN 12952-3:2011 Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler
EN 12952-5:2011 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
EN 12952-6:2011 Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler
EN 12952-7:2012 Water-tube boilers and auxiliary installations - Part 7: Requirements for equipment for the boiler
EN 12952-8:2002 Water-tube boilers and auxiliary installations - Part 8: Requirements for firing systems for liquid and gaseous fuels for the boiler
EN 12952-9:2002 Water-tube boilers and auxiliary installations - Part 9: Requirements for firing systems for pulverized solid fuels for the boiler
EN 12952-10:2002 Water-tube boilers and auxiliary installations - Part 10: Requirements for safeguards against excessive pressure
EN 12952-11:2007 Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting devices of the boiler and accessories
EN 12952-14:2004 Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquefied pressurized ammonia and ammonia water solution
EN 12952-16:2002 Water-tube boilers and auxiliary installations - Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler
EN 12952-18:2012 Water-tube boilers and auxiliary installations - Part 18: Operating instructions
EN 12953-1:2012 Shell boilers - Part 1: General
EN 12953-2:2012 Shell boilers - Part 2: Materials for pressure parts of boilers and accessories
EN 12953-3:2016 Shell boilers - Part 3: Design and calculation for pressure parts
EN 12953-4:2002 Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler
EN 12953-5:2002 Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler
EN 12953-6:2011 Shell Boilers - Part 6: Requirements for equipment for the boiler
EN 12953-7:2002 Shell boilers - Part 7 : Requirements for firing systems for liquid and gaseous fuels for the boilers
EN 12953-8:2001 Shell boilers - Part 8: Requirements for safeguards against excessive pressure
EN 12953-8:2001/AC:2002
EN 12953-9:2007 Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories
EN 12953-12:2003 Shell boilers - Part 12: Requirements for grate firing systems for solid fuels for the boiler
EN 12953-13:2012 Shell boilers - Part 13: Operating instructions
EN 13121-1:2003 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions
EN 13121-2:2003 GRP tanks and vessels for use above ground - Part 2: Composite materials - Chemical resistance
EN 13121-3:2016 GRP tanks and vessels for use above ground - Part 3: Design and workmanship
EN 13134:2000 Brazing - Procedure approval
EN 13136:2013 Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation
EN 13175:2014 LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings
EN 13348:2016 Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum
EN 13371:2001 Cryogenic vessels - Couplings for cryogenic service
EN 13397:2001 Industrial valves - Diaphragm valves made of metallic materials
EN 13445-1:2014 Unfired pressure vessels - Part 1: General 非直接接触火焰压力容器-第一部分:总则
EN 13445-1:2014/A1:2014
EN 13445-2:2014 Unfired pressure vessels - Part 2: Materials
EN 13445-2:2014/A1:2016
EN 13445-3:2014 Unfired pressure vessels - Part 3: Design
EN 13445-3:2014/A1:2015
EN 13445-3:2014/A2:2016
EN 13445-3:2014/A3:2017 (new)
EN 13445-4:2014 Unfired pressure vessels - Part 4: Fabrication
EN 13445-5:2014 Unfired pressure vessels - Part 5: Inspection and testing
EN 13445-6:2014 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
EN 13445-8:2014 Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys
EN 13445-8:2014/A1:2014
EN 13458-1:2002 Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements
EN 13458-2:2002 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
EN 13458-2:2002/AC:2006
EN 13480-1:2017 Metallic industrial piping - Part 1: General工业金属管-第1部分：总则
EN 13480-2:2017 Metallic industrial piping - Part 2: Materials
EN 13480-3:2017 Metallic industrial piping - Part 3: Design and calculation
EN 13480-4:2012 Metallic industrial piping - Part 4: Fabrication and installation
EN 13480-4:2012/A1:2013
EN 13480-4:2012/A2:2015
EN 13480-5:2017 Metallic industrial piping - Part 5: Inspection and testing
EN 13480-6:2017 Metallic industrial piping - Part 6: Additional requirements for buried piping
EN 13480-8:2017 Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
EN 13547:2013 Industrial valves - Copper alloy ball valves
EN ISO 13585:2012 Brazing - Qualification test of brazers and brazing operators (ISO 13585:2012) 钎焊-钎焊工和钎焊操作工认可试验
EN 13648-1:2008 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service
EN 13648-2:2002 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service
EN 13709:2010 Industrial valves - Steel globe and globe stop and check valves
EN 13789:2010 Industrial valves - Cast iron globe valves工业阀门-铸铁截止阀
EN 13831:2007 Closed expansion vessels with built in diaphragm for installation in water
EN 13835:2012 Founding - Austenitic cast irons
EN 13923:2005 Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing
EN 14129:2014 LPG Equipment and accessories - Pressure relief valves for LPG pressure vessels
EN 14197-1:2003 Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirements
EN 14197-2:2003 Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
EN 14197-2:2003/A1:2006
EN 14197-2:2003/AC:2006
EN 14197-3:2004 Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements
EN 14197-3:2004/A1:2005
EN 14197-3:2004/AC:2004
EN 14222:2003 Stainless steel shell boilers
EN 14276-1:2006+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements制冷系统和热泵压力设备-容器-一般要求
EN 14276-2:2007+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
EN 14359:2006+A1:2010 Gas-loaded accumulators for fluid power applications
EN 14382:2005+A1:2009 Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar
EN 14382:2005+A1:2009/AC:2009
EN 14394:2005+A1:2008 Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
EN 14570:2014 LPG equipment and accessories - Equipping of overground and underground LPG vessels
EN 14585-1:2006 Corrugated metal hose assemblies for pressure applications - Part 1: Requirements
EN 14917:2009+A1:2012 Metal bellows expansion joints for pressure applications
EN 15001-1:2009 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN ISO 15493:2003 Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system - Metric series (ISO 15493:2003)
EN ISO 15493:2003/A1:2017
EN ISO 15613:2004 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)金属材料焊接工艺规程和评定 预生产焊接试验的评定
EN ISO 15614-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004)金属材料焊接工艺规程和评定–焊接工艺试验第 1 部分: 钢的电弧焊和气焊与镍及镍合金的电弧焊
EN ISO 15614-1:2004/A1:2008
EN ISO 15614-1:2004/A2:2012
EN ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
EN ISO 15614-2:2005/AC:2009
EN ISO 15614-4:2005 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005)
EN ISO 15614-4:2005/AC:2007
EN ISO 15614-5:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004)
EN ISO 15614-6:2006 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys (ISO 15614-6:2006)
EN ISO 15614-7:2007 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding (ISO 15614-7:2007)
EN ISO 15614-8:2016 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016)
EN ISO 15614-11:2002 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002)
EN ISO 15620:2000 Welding - Friction welding of metallic materials (ISO 15620:2000)
EN 15776:2011+A1:2015 Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 %
EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006)工业阀门-热塑性材料球阀
EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)工业阀门-热塑性材料蝶阀
EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006)工业阀门-热塑性材料止回阀
EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)工业阀门-热塑性材料隔膜阀
EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006)工业阀门-热塑性材料闸阀
EN 16767:2016 Industrial valves - Steel and cast iron check valves工业阀门-钢和铸铁止回阀
EN ISO 21009-2:2015 Cryogenic vessels - Static vacuum insulated vessels - Part 2: Operational requirements (ISO 21009-2:2015)
EN ISO 21013-3:2016 Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and capacity determination (ISO 21013-3:2016)
EN ISO 21028-1:2016 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016)
EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006)
hgcert
